- Home
- Clay tutorials
- How to Get a Smooth, Crack-Free Finish on Air Dry Clay
How to Get a Smooth, Crack-Free Finish on Air Dry Clay
On this page

Quick answer: Smooth the clay while it is soft with a lightly damp finger, dry it slowly and evenly, then sand lightly once dry. A coat of gesso before painting gives an even more uniform surface.
While the clay is soft
- Knead well first to remove air pockets and dry lumps.
- Damp finger, not wet: run a lightly damp finger over seams and fingerprints.
- Roll evenly: an acrylic roller gives flat, even sheets.
- Smooth with a tool: a ball tool reaches curves and corners fingers cannot.
While it dries
Dry slowly at room temperature, away from sun and fans, so the surface does not split. See why air dry clay cracks.
Once it is dry
- Sand gently with fine sandpaper or a sanding sponge.
- Wipe off dust with a dry soft brush.
- Fill any small marks with a paste of clay and water, let it dry, and sand again.
- Optional: brush on gesso for a smooth matte base before painting.
Finish
Paint with acrylics, then seal with varnish. See seal before or after painting?



